I'm busy working on my blog posts. Watch this space!

Please reload

Follow Us

March 2, 2017

The industrial valve repair industry has lost one of its most respected members. Dale Brickner passed away on January 30, 2017.

Our condolences go out to Laura, Kori, Austin, Taylor and his brother Brad, as well as all other family members. They also go out to anyone wh...

December 30, 2016

On December 16th, the CVS family held our second annual Holiday Party at The North Beach Restaurant in San Francisco, good times were had by all.  We are very grateful for all our full time and contract workers who worked through the holidays and during our holiday par...

September 30, 2016

The third quarter of 2016 marked the completion of Custom Valves Solutions expansion. State of the art material handling includes a 6 Ton and two 3 Ton bridge cranes as well as four 2 Ton hoists servicing our assembly area and providing a safe working environment.  Thi...

June 30, 2016

The second quarter marked the third anniversary of Cust om Valve Solutions. Heading into our fourth year we made a major asset purchase of a local machine shop which has strengthened our internal capabilities significantly. May marked the beginning of another major tur...

March 31, 2016

The New Year was off to a racing start at CVS.  With thirty technicians the first quarter marked the beginning and the end of a major turnaround.  Logistics became critical as the start time was delayed a full week and a half, but the end date remained the same. A stro...

December 31, 2015

Rounding out the year the Control Valve Test Stand is completed and fully operational. Most of December was spent in preparation for a 10,000-man hour planned turnaround set to begin in January at. On December 19th the CVS family held our annual Holiday Party at The No...

September 30, 2015

With the addition of key personnel we have begun to persue the marine industry and we were immediately awarded a major contract. 

Several shop improvements have taken place during this quarter. We have designed and are fabricating a control valve test stand. With a 6” p...

June 30, 2015

We upgraded our three-ton bridge crane to six tons, allowing even greater lifting capacity.

 

Our field service trailer was “on the road” for ten straight weeks for two planned outages at major power plants.

 

With some minor tweaking our quality manual has been accepted b...

March 31, 2015

 

The build out of the shop has been completed.

 

The field service trailer is now fully tooled including an eighty-inch lathe, with a swing capacity of thirty inches and a spindle hole of 4 1/8 inch.

 

We purchased a new AVK and received the associated training. We modifie...

January 1, 2015

 

This quarter was dedicated to the shop build out and completion of our forty-eight-foot mobile machine tool trailer.

 

Machinery was set into place including two lathes, a radial arm drill as well as a milling machine.

 

A two-thousand square foot tool room was also const...

Please reload

  • Facebook Basic Square
  • Google+ Basic Square

March 2, 2017

December 30, 2016

September 30, 2016